Gatemate Cranked Bands and Hooks on Plates, Gate Hinge
Traditional Style Heavy Duty Gate Hinge Designed for wood Gates. Huge size range from 8″ to 36″.
Available in Hot dipped Galvanized or Premium Shell Finish.
8″ 12″, and 18″ come 5 pairs per box. 24″, 30″, and 36″ come 2 pairs per box.
Stainless Steel Fasteners included with Premium Shell Black, Galvanized Fasteners included with Hot Dipped Galvanized Hardware.
How to Install the Cranked Bands and Hooks Gate Hinge:
Note: Install with both pins up to easily remove the gate or with one pin down to prevent removal of the gate.
1 Place bands onto door/gate in desired positions. Ensure bands are central on rails and overhanging so the hooks are central on the post/frame. Fasten the bands to the gate with the bolts & screws provided.
2 Place the door/gate into position and support allowing correct clearances between the post/frame.
3 Insert the hooks into the bands and fix with the screws provided to the post/frame. Top hook can be inverted to prevent door/gate from being lifted off, if desired.
4 Grease for smooth operation.
Directions are for guidance only. Requirements may vary due to individual circumstances. We recommend drilling smaller pilot holes before screwing to reduce the chance of splitting wood, and when going completely through wood products, drill from both sides.
